[ product name]: Biotech Crystal Liquid Wax
[ model] B-1119
[ Specification] 450G*24
[ Validity period]: three years
[ Implementation standards]: Implementation standards: Q/( GZ) BCL 54
[ product description]: This product contains hardening and polymer synthetic formula, which is extremely easy to apply. It has the function of decontamination and polishing, and can quickly penetrate the fine patterns on the paint surface, making the paint surface regain its bright luster. It removes stains and forms a strong and bright layer at the same time. The wax layer effectively prevents the paint surface from aging, cracking and discoloration, and has waterproof properties after use.

[ Instructions]:
1. Clean and dry the car.
2. After fully shaking the liquid in the tank, use the matching sponge to apply an appropriate amount of liquid, spread it thinly on the car body, and then use a towel to modify it.
3. For stubborn dirt, you can apply more liquid and apply appropriate pressure to wipe it away.
4, dry 5- After 10 minutes, wipe it clean with a clean soft towel.
5. After using the towel, clean it with washing powder and then dry it for next use.

[ Precautions]:
1. Before waxing, the car body needs to be washed and dried.
2. Do not do it in the sun or dew at night.( Recommended in a covered garage) Waxing in the sun will cause the softener in the wax to evaporate quickly, causing the active ingredients in the car wax to solidify quickly, which is not conducive to full penetration.; The wax cannot solidify in dew and humid environments, making subsequent wiping work impossible.
3. Waxing should be carried out piece by piece according to the body sand board area.( For example, the engine cover is one piece, the fender on one side is one piece, the single door is one piece, etc.) .
4, glass, black( No paint surface) Do not wax the plastic parts and tire rubber.
5. Waxing technique: Use a sponge or soft cotton cloth dipped in a small amount of car wax. Use the ellipsis technique to dot a whole row. Then use your wrist skills to draw a small circle in a row. The intensity should be even and smooth. You must dot one row and apply it immediately. One row. The circles and rows drawn should be as neat as possible( Do not wipe dried areas repeatedly) .Encountered stubborn traces( Such as scratches caused by foreign objects, paint marks, etc.) , can be removed by rubbing with appropriate force.
6. After the entire car body is waxed, open the door and add some paint around the door frame. There is no need to wax the inside of the hood and trunk lid. Cover the used wax cans tightly in time to prevent evaporation and deterioration. Close to the chassis of the car and do it last. , to prevent gravel from getting mixed into it.
7. After the wax surface dries,( about half an hour) , use a soft towel to wipe clean in the order of waxing. When wiping, be sure to close all doors and windows to prevent dust from floating into the car. After wiping, use a feather duster to remove the thin dust.