- SPU: AL-YZIZ-jq2gpew[A4]
- Processing and customization: No
- Usage: automatic spray painting
Product name: Botili high temperature resistant automatic spray paint
color: Silver, black, red
Withstand temperature: black( 200℃) silver( 400℃)
capacity: 400ml
Validity period: 3 years
This product is a self-drying silicone aerosol paint at room temperature. It has the characteristics of flexible and easy construction operation, good spray atomization and high spray rate. The paint film will be dry at room temperature after 30 minutes and dried at 200 degrees for 2 hours. The performance is even better, with long-term heat resistance below 300 degrees and maintaining intact performance, and the silver temperature resistance can reach 400 degrees Celsius.
Mainly suitable for use in chimneys, pipes, automobile engines, automobile exhaust pipes, motorcycle engines, motorcycle exhaust pipes, and other high temperature environments.
Instructions:
1. First remove oil stains, water stains and dust from the areas to be painted.
2. Before spraying, the can must be shaken up, down, left, and right for about 2 minutes until the spray liquid is fully mixed.
3. About 20 meters away from the surface of the object to be sprayed- At 30 cm, press down the nozzle with your index finger and spray back and forth at a constant speed. The recommended number of application passes is: 3 times, the construction interval of each layer is 5- 10 minutes is better.
Precautions:
1. Store away from children.
2. When spraying, the aerosol tank must be kept upright and the angle between it and the horizontal plane shall not be less than 45°.
3. Please perform construction in a well-ventilated area.
4. If it splashes into your eyes, rinse immediately with clean water and seek medical treatment.
5. If swallowed accidentally, vomiting should occur immediately and seek medical treatment.
6. This product is flammable. Please store it in a place below 40℃. Do not put it in a car. Keep away from heat sources and open flames. It is strictly forbidden to expose it to the sun, puncture or burn the can.
7. It is a normal phenomenon for aerosol products that the net weight and gross weight change over time. The loss rate is less than or equal to 2%/ Year.