Product details

Brick tile leveling system
Material: PP + stainless steel
quantity: 50 sets/ Bag + 1 tool

1.5mm cross clip 100pcs/ Bag*1
Applicable gasket: 2mm- 8mm spacer
Tile thickness: 5mm- 20mm
color: as the picture shows
feature:
●Wear-resistant and recoverable.
●Easy for DIY operation.
●Keep the tile scale at the same level.
●Increase the speed of ceramic tile installation.
●Reduce installer fatigue/ pressure.
●Almost no slippery, flat surface.
●Reduces the need for grinding and polishing.
●Prevent tiles from moving while curing.

Use suggestions:
1. Lay the first tile, leaving a distance of more than 2mm( Use with cross spacers) .close to the tiles.
2. Insert the T-shaped needle along the gap between the tiles.
3. Then rotate 180 degrees and stick the T-shaped pins on the bottom of the two tiles.
4. Use hands/ Use a special wrench to adjust the cover until both tiles are on the same level.
5. After leveling, about 5- 6 hours, in cement/ Before the adhesive is completely dry, turn the cap in the opposite direction and remove 180° T-shaped pin until the words are removed.